Feedback / Suggestions

VC Specifications

VC End points, the camera, codec, mics, remote and necessary cables should be supplied from the same OEM

Sl No

Specifications

1

Package Should  Include:

 

Full HD 1080p camera, codec, Microphone Array, cables, and remote control

 

Following Video Standards and Protocols should be supported:

 

H.263, H.264, H.264 MPEG-4 AVC / H.264 MPEG-4 with Annex-G (Scalable Video Coding)

 

H.239

 

H.263 & H.264 Video error concealment

2

Video Input

 

It should have 1 x Full HD Camera as Input HDCI / HDMI port. 
# It should have 1 x DVI/HDMI port along with PC audio sharing.

3

Video Out

 

It should have atleast 2 x HDMI/DVI or / equivalent port to connect displays.

4

Following Video Resolution should be supported:

 

1080p @ 60 fps, 1080p @ 30 fps, 720p @ 60 fps, 720p @ 30 fps, 4SIF/4CIF @ 60 fps, 4SIF/4CIF @ 30 fps, SIF (352 x 240), CIF (352 x 288), QSIF (176 x 120), QCIF (176 x 144)

5

Following Input and Output Content Video Resolution should be supported:

 

Input: Up to 1920 x 1080p

 

Output: Up to 1920 x 1080p

 

The  Content Frame Rate of  5 - 30 fps (up to 1080p resolution at 30 fps) should be supported

 

It should be possible to do Content Sharing during a VC call.

6

Following Camera specifications should be met:

 

Full HD 1080p 60fps

 

1920 x 1080p CCD / CMOS imager

 

Optical Zoom - 10X or more

 

Field of View 70 Degree

7

Following Audio Input  ports should be available on the codec:

 

 

It should support total of 2 microphones

It should also have 1 x 3.5 mm Stereo line-in port.

 

8

Following Audio Output ports should be available on the codec:

 

It should have atleast 1 x 3.5mm Stereo Line-Out port /

It should have atleast 1 x HDMI port

9

Other Interfaces

 

It should have at least 1 x USB 2.0 / 1 RS232 Mini-Din 8-pin port

10

Following Audio Standards and Protocols should be met:

 

G.711,G.722 OR Equivalent OR Better

 

It should support Automatic gain control

 

It should support Automatic noise suppression

 

It should support Automatic noise reduction

 

It should support Instant adaptation echo cancellation

 

It should have Audio error concealment

 

It should support  Lost Packet Recovery or equivalent technology

 

Support G.711, G.722 or higher or equivalent

11

Following Other Supported Standards should be supported:

 

H224/H.281/H323 Annex Q, H.225, H,245, H.239, H.241, H.235

12

Following Network paramters should be supported:

 

It should have atleast 1 x 10/100/1G Ethernet

 

It should support H.323 and/or SIP up to 6 Mbps

 

It should support reconfigurable MTU size

 

It should support RS232 / USB with API

 

It should support Microsoft Office Communications server integrations/ It should support Microsoft Lync 2010

 

It should also support IBM Sametime

13

Following Security specifications should be supported:

 

(a) Should support AES 128-bit

(b) Authenticated access to admin menus, web interface and telnet

14

It should also support internal / external multipoint license for up to 4 sites via software upgrade. It will be decided on how many units is this feature required with L1 bidder.

15

It should be possible to integrate a conference phone (Optional)

16

It should be possible to integrate a Audio Mixer through a digital interface or equivalent interface.

17

Languages should support Kannada and English to display the Participants name in VC Session on Screen

18

Standard operating voltage/power specifications should be complied:

 

100-240 VAC, 50-60 Hz,

19

Following  Environmental Specification should be met:

 

a. Operating temperature: 0—45°C

 

b. Operating humidity: 15—80%

20

Each endpoint shall be QoS enabled to ensure optimum video and audio quality:

 

  • Should support packet-loss based down speeding or Equivalent

 

  • IP DiffServ (If Applicable)

21

Point to Point Conference call between  VC end points should not consume MCU Port

22

Endpoint should be both “IPv4 and IPv6 ready”

 

Specification for VC Display

 

Line Items

65" Display or above

55" Display

Resolution (PC & Video)

1920x1080

1920x1080

Backlit

White LED

White LED

Display Colours

  • Minimum 4000:1 or more in VA Panel

OR

1000:1 with IPS panel

  • Minimum 4000:1 or more in VA Panel

OR

1000:1 with IPS panel

Brightness

450 cd/msquare or above

450 cd/msquare or above

Contrast Ratio

Minimum 2000:1 or more

Minimum 2000:1 or more

Viewing Angle

Min 176 Degrees or more

Min 176 Degrees or more

Response Time

10 ms or better

10 ms or better

Input

RGB, HDMI (PC & AV), Audio (minijack, L/R),Composit Video, Component

RGB, HDMI (PC & AV), Audio (minijack, L/R),Composit Video, Component

Speaker (Built in)

10 +10

10 +10

Operating Temp

0 - 40 degree

0 - 40 degree

Power Supply

100-240 VAC, 50/60 Hz

100-240 VAC, 50/60 Hz

Power Consumption

740 W or less

740 W or less

Wi Fi Connectivity

Optional

Optional

Special Feature

Power saver mode

Power saver mode

 

 

1 KVA on-line UPS (1 hrs backup)

Specifications

 

Type

Online

Capacity

1 KVA

Backup time

1 hrs

Input Frequency

50 Hz. +/- 5%

Input Voltage

160 V – 270 V

Output Voltage

230 V +/- 1% V

Output Frequency

50 Hz +/- 0.2 Hz.

Input Power Factor

> 0.9

Output Power Factor

0.8 lag to unity PF

Waveform

Pure Sine Wave

Alarm

On Battery, Low Battery, UPS Over Load

Technology

IGBT based PWM  with isolation  transformer

Computer interface

Software with communication interface for monitoring the health of the UPS. Automatic shutdown under Windows 7 & Diagnostics.

Battery make

Preferred brands: Panasonic/YUSA/Exide/CSB/Amarraj/Relicell

Battery Type

SMF-VRLA

VAH

Not less than 1440VAH

Inverter Efficiency

90%

Overall Efficiency

85%

Crest Factor

3:05:01

Regulation

 +/- 1%

Switching Frequency

 Above 20 KHz

Warranty

5 year on site comprehensive including batteries

Protection

Automatic discharge protection with self test features, Over Load, Surge protection, Input fault, Cold start, Low Battery, Battery over charge, Output short circuit, Charging Current Circuit, inverter over temperature

LCD display

Output voltage, Output current, Output frequency, Input Voltage, Battery Voltage

Load Test

At 100 % load on Resistive load

THD

< 3% for Linear, < 5% for Non Linear Load

Certification

ISO 9001:2000 & ETDC /CPRI test report

Last Updated: 28-05-2019 01:05 PM Updated By: Admin



Disclaimer :

Please note that this page also provides links to the websites / web pages of Govt. Ministries/Departments/Organisations.The content of these websites are owned by the respective organisations and they may be contacted for any further information or suggestion

Website Policies

  • Copyright Policy
  • Hyperlinking Policy
  • Security Policy
  • Terms & Conditions
  • Privacy Policy
  • Help
  • Screen Reader Access
  • Guidelines

Visitors

  • Last Updated​ :
  • Visitors Counter :
  • Version :
CONTENT OWNED AND MAINTAINED BY : Karnataka State Wide Area Network
Designed, Developed and Hosted by: Center for e-Governance - Web Portal, Government of Karnataka © 2024, All Rights Reserved.

Best viewed in Chrome v-87.0.4280.141, Microsoft Edge v-87.0.664.75, Firefox -v-83.0 Browsers. Resolution : 1280x800 to 1920x1080